Weberpral M Monocouche Render 25Kg 016 Ivory

Through colour monocouche render which can achieve a scraped or roughcast finish – suitable for most types of brick or blockwork. A single coat render applied in two passes means fast application with shorter programme periods, reduced scaffolding and site costs, as well as earlier completion of ground works.

About this product

weberpral M is a weather-resistant exterior render and is ideal for new build or refurbishment projects. Monocouche can be used to produce a range of finishes:

• Scraped
• Sprayed roughcast
• Dry dash

Can be used to create ashlar and quoin features, and is suitable for use on entire elevations, feature panels or smaller areas such as garden walls.

Features and benefits

• Single coat for fast application and shorter programme periods
• Formulated to be spray applied by render pump for faster application
• Coloured render for low maintenance with no further decoration required
• Can be used to create a scraped or roughcast render finish 
• Weather and algae-resistant 
• BBA approved certificate no. 17/5464

Things to consider

• Do not apply if frost is forecast within 24 hours of use
• Do not apply in damp or wet conditions
• Do not apply in temperatures below 5°C or above 30°C
• Do not apply in direct sunlight or where the substrate is hot
• Not suitable for use on construction board substrate (concrete particle board/render board), use weberend MT
• Not suitable for use on insulation board substrate, use webertherm XP
• When stored unopened in a dry place at temperatures above 5°C, shelf life is 12 months from the date of manufacture printed on the side of the bag