Easy Joint Select Compound 12.5kg Tungsten

EASYJoint Select - Tungsten 12.5Kg

EASYJoint Select is a unique ready to use self curing jointing material for all types of paving having joints of 3mm and over. EASYJoint Select is a quick and easy way of applying a permanent joint with no special machinery or equipment required. EASYJoint Select is suitable for natural stone, concrete, slate, clay, terracotta and granite and can be used in areas subject to light vehicular traffic.

Developed from the best-selling EASYJoint Original, EASYJoint Select is an all-year-round jointing compound developed especially for ceramic and porcelain paving. EASYJoint launched in 2010 and is a market leader, loved by landscape professionals and the DIY sector alike.

EASYJoint Select retains the sweep-in application method that made EASYJoint Original so popular, making it EASY to use and faster than traditional methods. Wet the paving, brush in the compound, then strike the joints for a perfect, professional finish every time. 

Solid colours and a smoother finish

• Easy to use and faster than traditional methods.
• Ready to use with no mixing required.
• Wet the paving, brush in the compound, then strike the joints for a smooth finish. 
• Unused product can be kept for future use.
• For all joints of 3mm wide and over.

INSTALLATION GUIDE

Before you start - Joints must be at least 3mm wide and 20mm deep

Step 1. Pre-soak - For natural stone paving, pre-soak.

Step 2. Pour - Once the area is thouroughjly soaked, cut open the bag and pour the EASYJoint Select onto the paving.

Step 3. Wet - Wet the EASYJoint Select to create a slurry.

Step 4. Sweep - Sweep the compound into the joints whilst wetting it.

Make sure you work quickly and do not leave the EASYJoint Select in a pile or in one spot.

Top Tip!  It is easier to use EASYJoint Select with two people, one of them to sweep the compound and the other to spray the water.

Step 5. Top-up - Use more EASYJoint Select to top up any areas and repeat the washing process as before.

Top Tip!  In warmer weather, paving can dry quickly.  Therefore, ensure paving is kept wet.

Step 6. Final Rinse - Apply a final rinse of water across the surface to wash off any EASYJoint Select residue and to aid the final compaction process.

Top Tip!  Reduce wastage by saving any unused product by submerging it on 2 inches of water.

Step 7. Pointing - Finally, iron the joints to increase compaction and create a smooth finish.