Timloc Soffit Vent Strip Brown 2.4M 1137

Soffit Vent Type C

Efficient strip type eaves ventilator for use on roofs where the eaves incorporate a soffit board of between 6 and 9mm in thickness.

Use

• For roof eaves ventilation
• On roofs where the eaves incorporate a soffit board
• With soffit boards of between 6mm and 9mm in thickness

Features and Benefits

• Efficient, unobtrusive and easy to fit
• 4mm wide slots comply with BS 5250 : 2011
• Durable and totally resistant to decay
• UV stabilised and colourfast

Quality

• Satisfies all NHBC requirements
• Manufactured to BS EN ISO 9001 and BS EN ISO 14001
• Complies with all relevant Building Regulations
• Meets all relevant British Standards

Material and Colour Choice

• Manufactured by extrusion in UPVC
• Available in white or brown - 1137 also available in black

Products in the System

1137
• Provides ventilation equivalent to a continuous 10mm opening (10,000mm² per metre run).
• Supplied in 2.4m lengths.

Installation Advice

• Use product 1137 to ventilate pitched roofs, where the pitch of the roof is 15 degrees or more, and the roof void is attic or loft space
• Ideally the soffit board should be 6mm in thickness. Thicker boards up to 9mm can be accommodated with care, but it may be necessary to chamfer the edge of the board to make installation easier
• Ensure the ventilator is fixed securely to the back of the fascia board using all the fixing holes provided.  Screws are preferable, but nails may be used with care
• Ventilation must be provided for the full length of the eaves and along both sides of the building to create a cross flow ventilation action